WiMi6200 - Wireless SD/HD/3G-SDI Solution with 600m (1,800 ft) Radio Coverage at Line of Sight

For Inquiry- Please Contact us at peter.jd.park@gmail.com +82-2-1566-6795 Wireless SD/HD/3G-SDI Solution with 600m (1,800 ft) Radio Coverage at Line of Sight The WiMi6200T/R system provides high quality full HD video and audio over Wi-Fi with 40ms of low encoding delay, which can be a used for broadcasting camera. It has easy interface for the selection of vacant frequency on the shooting area. It can support 1:4 multicasting over Wi-Fi, also. The WiMi6200 has wide range of DC power input from 6V ~ 16V for various battery operation. And, it can be directly attable on the back side of video camera through V-mount.

Small Form Factor High-end Solution of the Wireless/Ethernet full HD with 30 Mbit/s of Encoding Rate The WiMi6200T and WiMi6200R provides high quality full HD encoding/decoding function with low latency of 40ms for encoding and decoding, each. It supports wide range of encoding rate from 1Mbps ~ 30Mbps for the high quality video for video broadcasting.

Full HD Real-time Streaming Server over Internet (RTSP/RTP/UDP or MPEG-2 TS/UDP)
The WiMi6200T provides RTSP streaming server functionality. So, you can receive full HD video with VLC media player in the PC as well as the receiver, WiMi6200R, simultaneously.

The WiMi6200T also can be used as an real-time MPEG-2 TS/UDP streaming server with linear PCM audio for IPTV network. So, you can receive full HD video with a H/W based H.264 decoder or VLC player in PC. This low cost IPTV encoder solution will help to deliver full HD video to existing DiD TV or digital signage display.

Provides One-to-Many Multicasting Capability with a Low-end L2 switch without High-end Expensive Router
It supports one-to-many multicasting function over Wi-Fi or Ethernet LAN/IP network. So, there is no restriction on the numbers of receiver in Ethernet LAN/IP networks without expensive L3 router. In case of the Wi-Fi mode, one transmitter can transmit the video up to maximum 4 receivers at the same time without any additional delay.

Board Solution without Enclosure or Cased WiMi6200 Solution Provided

WiMi6200T: Transmitter (Enclosure & board)	WiMi6200R: Receiver (Enclosure & board)

Download Brochure
Download Datasheet

Specifications

WiMi6200 Main Highlights 1080i60/1080p60 HD encode/decode with H.264 Baseline Profile Level 4.2 Supports both interlacing and progressive input.streams of HD,1920 x 1080 at 60 frame per second Very Low Encoding Latency, 40 ms 40ms of encoding latency in 1080p60 HD Total latency of encode-decode in 1080p60 HD: 80ms Supports TV standards DTV: 1920x1080p60/i60/p50/i50/p30/p24, 1280x720p60/p50, 720x480i60, 720 x 576i50 Popular wireless: IEEE802.11n with maximum distance of 600 m (1,800 feet) at line of sight The video and audio data from WiMi6200T and WiMi6200R are transmitted and received through the standard IEEE 802.11n wireless LAN. Although the air condition is varying from time to time, it is enough to deliver audio/video data because WiMi6200 series requires typically 10~20 Mbit/s, which is tenth of wireless LAN bandwidth. Cost effective High-end Solution for the Wireless or Ethernet full HD with 30 Mbit/s of Video Encoding Rate SD-SDI, HD-SDI and 3G-SDI Interface Provides One-to-Many Multicasting Capability Full HD Live Streaming Server over Internet (RTSP/RTP/UDP or MPEG-2 TS/UDP) Range of video encoding rate for RTSP/RTP/UDP streaming: 1 ~ 30Mbps Range of video encoding rate for MPEG-2 TS/UDP streaming: ~ 15Mbps Supports either High Quality 16-bit 48kHz linear PCM audio Compact Size and Low Power Consumption WiMi6200T/R enclosure (mm): 155 (H) x 30 (W) x 90 (D) Power consumption: 10W ~ 12W DC input range: 6V ~ 16V Transmitter (WiMi6200T) Video Input SD-SDI, HD-SDI & 3G-SDI: up to 1080i60/p60 Pass-through SDI output from SDI input port Audio Input SDI : Embedded audio on the SDI port Analog Stereo Audio: 48kHz 16-bit ADC Mini Stereo Phone Jack Encoding of Moving Pictures H.264 (MPEG-4 Parts10:AVC) Baseline Profile with Level 4.2 (1920 x 1080p60) Wireless & Wire-line Output for Audio/Video 802.11n Wi-Fi, 5GHz band Maximum 600m (1,800 ft) at line of sight 10/100 BASE-TX, Cat.5 UTP cable (150m) Receiver (WiMi6200R) Wireless & Wire-line Output for Audio/Video 802.11n Wi-Fi, 5GHz band Maximum 600m (1,800 ft) at line of sight 10/100 BASE-TX, Cat.5 UTP cable (150m) Decoding of Moving Pictures H.264 (MPEG-4 Parts10:AVC) Baseline Profile with Level 4.2 (1920 x 1080p60) Audio Output SDI : Embedded audio on the SDI port Analog Stereo Audio: 48kHz 16-bit DAC Mini Stereo Phone Jack Video Output SD-SDI, HD-SDI & 3G-SDI: up to 1080i60/p60

WiMi4000 - Wireless HDMI H.264 Full HD encoder/decoder

For Inquiry- Please Contact us at peter.jd.park@gmail.com                                                       +82-2-1566-6795 Near zero latency H.264 compression up to 1920x1080p60 WiMi4000 provides wireless HDMI transmitter/receiver solution at the resolution of 1920x1080p60. Hardware-based H.264 compression engine is used for encoding full HD video signals. So, it can deliver full HD (1920 x 1080p60) video at 12 Mbit/s without any degradation of video quality. There is almost zero latency between transmitter (encoder) and receiver (decoder), approximately 80 milliseconds. Low latency is especially important for applications requiring real-time video transmission with the interaction. So, the WiMi4000 can be used for delay sensitive applications, such as PC2TV, PTZ camera or gaming console with the HDTV.

Supports various video connectors: HDMI, DVI, Y/Pb/Pr and PC Both the WiMi4000T, wireless HDMI transmitter and the WiMi4000R, wireless HDMI receiver have several video and audio interfaces. It supports HDMI and DVI interface with the DVI/HDMI gender. Also, RCA jacks for analog component signals (Y/Pb/Pr) as well as PC monitor out with D-Sub connector up to the 1080p60 resolution. So, it can be used to connect pc to the HDTV without expensive PC/component trans-coder, even though the connectors on PC and HDTV are different each other.

Linear PCM and compressed audio, Dolby digital and DTS
The WiMi4000T and WiMi4000R can transmit all audio formats, such as 44.1khz/48khz 24-bit 2-channel linear PCM and compressed audio, 5.1 channel Dolby digital and DTS. There are two RCA jacks for stereo audio inputs as well as mini stereo phone jack. The WiMi4000R has also mini stereo phone jack for stereo audio output as well as 2 RCA jacks.

Popular wireless: IEEE802.11n with maximum distance of 450 m (1,500 feet) at line of sight (LOS)
The video and audio data from WiMi4000T and WiMi4000R are transmitted and received through the standard IEEE 802.11n wireless LAN. Although the air condition is varying from time to time, it is enough to deliver audio/video data because WiMi4000 series requires typically 10~20 Mbit/s, which is tenth of wireless LAN bandwidth.

Provides One-to-Many Multicasting Capability
It supports one-to-many multicasting function. In Wi-Fi Mode, four receivers can display full HD video simultaneously. In case of PLC modem, maximum 16 receivers can get full HD video from a transmitter at the same time. There is no restriction of the numbers of receiver in Ethernet LAN mode.

Full HD Real-time Streaming Server over Internet (RTSP/RTP/UDP or MPEG-2 TS/UDP)
The WiMi4000T provides RTSP streaming server functionality. So, you can receive full HD video with VLC media player in the PC as well as the receiver, WiMi4000R, simultaneously. Of course, the PC can be connected to the streaming server, WiMi4000T, wirelessly through the 802.11n WiFi.

The WiMi4000T also can be used as an real-time MPEG-2 TS/UDP streaming server for IPTV network. So, you can receive full HD video with a H/W based H.264 decoder or VLC player in PC. This low cost IPTV encoder solution will help to deliver full HD video to existing DiD TV or digital signage display. Of course, the PC can be connected to the streaming server, WiMi4000T, wirelessly through the 802.11n WiFi.

Full Duplex Virtual Serial Cable (VSC) Function and Telnet Command Line Interface (CLI) for online control
The WiMi6000 provides full duplex virtual serial cable function with TTL level signal interface for online commands. Also, command line interface via Telnet server can be used for online control at remote location via Internet.

WiMi4000T: Transmitter	WiMi4000R: Receiver

Download Brochure
Download Datasheet

Specifications

WiMi4000 Highlights 1080i60/1080p60 HD encode/decode with H.264 Baseline Profile Level 4.2 Supports both interlacing and progressive input streams Very Low Encoding Latency, 40 ms 40ms of encoding latency in 1080p60 HD Total latency of encode-decode in 1080p60 HD: 80ms Supports both TV & Monitor standards DTV: 1920x1080p60, 1280x720p60, 720x480p60 VESA: HD1080(1920x1080), UGA(1600x1200) reduced format, WSXGA+(1680x1050), SXGA(1280x1024), WXGA(1280x800), XGA(1024x768), SVGA(800x600), VGA(640x480) Provides One-to-Many Multicasting Capability Full HD Real-time Streaming Server over Internet (RTSP/RTP/UDP or MPEG-2 TS/UDP) Maximum video encoding rate of RTSP/RTP/UDP streaming: 12 ~ 15Mbps Maximum video encoding rate of MPEG-2 TS/UDP streaming: ~ 8Mbps Maximum video encoding rate of MPEG-2 TS/UDP with LPCM audio streaming: ~ 5Mbps Low-cost Solution of the Wireless HDMI: maximum distance of 450 m (1,500 feet) at line of sight (LOS) Supports either High Quality 16-bit 48kHz audio or Bandwidth efficient G.711 Audio (64kbps or 128kbps) Dimension of the Board and Enclosure WiMi4000T/R enclosure (mm): 30 (H) x 184 (W) x 105 (D) WiMi4000T/R board (mm): 20 (H) x 174 (W) x 87 (D) Transmitter (WiMi4000T) Video Input HDMI: up to 1080p60, HDMI v1.3 COMPONENT (YPbPr): All HDTV formats up to 1080p60 with PC2Component Adaptor PC(D-Sub): VESA formats up to 1920x1080i/p CVBS: 720 x 480i/p Audio Input HDMI : HDMI compatible audio Analog Stereo Audio: 48kHz 16-bit ADC Stereo Phone Jack & Stereo RCA Jack Encoding of Moving Pictures H.264 (MPEG-4 Parts10: AVC) Baseline Profile with Level 4.2 (1920 x 1080p60) Wire-line Output for Audio/Video 10/100 BASE-TX, Cat.5 UTP cable (150m) Power Line Communication (PLC) Modem Wire-less Output for Audio/Video Supporting IEEE802.11n with internal antennas MIMO interface Up to 40m range through the wall, 450m (1,500 feet) at line of sight Receiver (WiMi4000R) Wire-less Input for Audio/Video Supporting IEEE802.11n with internal antennas MIMO interface Up to 40m range through the wall, 450m (1,500 feet) at line of sight Wire-line Input for Audio/Video 10/100 BASE-TX, Cat.5 UTP cable (150m) Power Line Communication (PLC) Modem Decoding of Moving Pictures H.264 (MPEG-4 Parts10:AVC) Baseline Profile with Level 4.2 (1920 x 1080p60) Audio Output HDMI : HDMI compatible audio Analog Stereo Audio: 48kHz 16-bit DAC Stereo Phone Jack & Stereo RCA Jack Video Output HDMI: up to 1080p60, HDMI v1.3, DTV and VESA formats COMPONENT (YPbPr): All HDTV formats up to 1080i60 CVBS: 720 x 480i/p